BT600 Dishmate - Economy Pass Through Dishwasher  
 

 

 

 

Winner of two Australian Design Awards:

With the BT600 Elite Series Dishwasher, Norris offers an economy model machine with all ease of operation only found in a pass through design. In developing this machine, Norris has applied its extensive experience gained from over 50 years of manufacturing dishwashers specifically designed to suit Australia’s unique and varied conditions. It continues in the tradition that has won Norris two Australian Design Awards.

Versatile:

The machine has a fixed ninety second cycle which is sufficient for washing most items as well as a manual wash cycle which subjects the load to extended wash periods for the removal of more heavily baked on substances. This allows the BT600 Elite dishwasher to process a wider variety of items.

Economical:

The BT600 offers savings for the buyer who wants a medium capacity pass through dishwasher and who has a good hot water supply with water pressure above 275kPa*. The machine has a recirculating wash system, which reduces hot water usage to 3.5 litres per cycle.

High Performance:

A powerful 560W wash pump sprays water above and below the load via rotating stainless steel wash arms. Top and bottom rinse arms then provide efficient rinsing and sanitising from the mains pressure copper booster tank.

Conformance to Regulations:

An internal interlock will prevent the machine from operating unless the temperature required by Regulation has been reached. Clearly legible wash & rinse water temperature gauges, allows the operator to confirm that the machine is operating within the prescribed range. The hood has a safety cut-out which halts the cycle if it is raised during operation.

Ergonomically Friendly:

The convenient bench height passthrough operation, eliminates the need for operators to bend over during loading & unloading. By simply raising and lowering the handle all cycles are initiated automatically.

Installation:

The BT600 is designed to be installed for either a straight through, corner, or front only operation.

Durable:

All stainless steel cabinet construction, including wash arms & scrap trays offers better protection against harsh detergents and hot water.

The scrap trays and pump filter protect the washpump and prevent blockages in the washarms. At Norris we are so confident in the strength of the machines that we offer a five year warranty on the cabinet.

Easy to Maintain:

Norris has deliberately refrained from using electronics in their machines. All controls are electromechanical and are readily available. This ensures that should your machine ever need servicing a local tradesperson will be able to get you up and running with minimum disruption and cost.

Service:

Norris machines are supported by a nationwide network of service agents.

*Water pressures below 275kPa are not recommended for this model.

**Depenant on incoming hot water temperatures & wash cycle selected.

***For pressures above 400kPa a pressure limiting valve must be used.

• Parts warranty extended to 2 years, if warranty card is returned to Norris within 14 days of purchase.

• Correct at time of printing, Norris is continually developing & upgrading its products & reserves the right to alter specifications with out notice.

MODEL BT600                        

ELITE SERIES PASS THROUGH DISHMATE

Pass through dishwasher

Ergonomic design eliminates bending during loading & unloading

Recirculating wash system

Savings, from only 3.5 litres of hot water being used per cycle

Manual wash

For removal of baked on substances

90 second wash cycle

Up to 600* plates per hour

Powerful 560W wash pump

Effective cleaning in a large capacity wash tank

Stainless steel impellor in wash pump

Does not break down with heat & detergents

Stainless steel cabinet construction

Durability & protection against harsh detergents & hot water

Straight through, corner or front only installation

Flexible in installation

Anti drip top washarm

No dripping on load during rinse cycle

Mains pressure rinse

Savings to be made where available water pressure is above 275kPa

Takes industry standard rack (500 X 500mm)

Will accept up to 12” or 30cm plates

Removable stainless steel scrap trays

Easy daily cleaning & prevents blockages in pump & washarms

Wash cycles are initiated by lowering hood

Operator friendly & simple to use

Hood safety cut-out switch

Operator safety

2 x plate, 1 x cup & 1 x cutlery racks supplied

No initial accessories to purchase

Water board type tested approved: TT Certificate No: PST 20029

Approved for direct connection to the water supply

Electromechanical controls

Easy to repair at the lowest cost & with minimum disruption