Winner of two Australian Design Awards:
The Elite Series BT700 and BT2000 continue in the tradition that has won Norris two Australian Design Awards. The new Elite Series dishwashers are the result of extensive market research and experience gained from over 40 years of manufacturing commercial dishwashers.Versatile:
Four wash cycle options give the machines the flexibility to handle any job. They have a sixty second cycle for washing glasses and lightly soiled plates, a ninety second cycle for a normal wash and a two minute cycle for more heavily soiled items. A manual wash is also included which enables baked on substance to be removed by subjecting them to extended wash periods.High Performance Under all Conditions:
The BT700 and BT2000 have been fitted with powerful wash pumps and separate rinse pumps. The rinse pumps are designed to deliver a constant rinse regardless of incoming water pressures. European machines with their mains pressure rinses have been found to be unsuitable in many installations with varying water qualities and pressures.Hot Water Booster Tank:
Hot water is delivered via the inbuilt water booster tank manufactured from special highgrade stainless steel to combat Australia’s highly corrosive water. High capacity three phase elements* ensure quick recovery.Conformance to Health Regulations:
An internal interlock will prevent the machine from operating unless the temperature required by regulation has been reached. Clearly legible wash & rinse gauges allow the operator to confirm that the machine is operating in the prescribed range.Suitable for Corner Installation:
Both the BT700 and BT2000 are designed to be installed for either a straight through, corner or a front only operation.Durable:
All stainless steel construction including wash arms and scrap trays ensure long life and protection against harsh detergents and hot water.Easy to Maintain:
Norris has deliberately refrained from using electronics in their machines. All controls are electromechanical and are readily available, this ensures that should your machine ever need servicing a local tradesperson will be able to get you up & running with minimum disruption and cost.Service:
Norris machines are supported by a nationwide network of service agents.* The BT700 is also available in 240 volts single phase. ** Dependant on incoming hot water temperatures and wash cycle selected ***For pressures above 400kPa a pressure limiting valve must be used.
- Pass through dishwasher - Ergonomic design eliminates bending during loading & unloading
- 4 wash cycle options - Flexibility to handle any wash job. Up to 1080* plates per hour
- 3 phase power - Faster recovery between loads for a faster turnaround
- Extra powerful 895W wash pump - Excellent coverage & cleaning in a large capacity tank
- Extra powerful 560W rinse pump - Ensures a thorough rinsing regardless of incoming water pressure Suitable for larger restaurants in low water pressure areas
- Anti drip top washarm - No dripping on load during rinse cycle
- Spacious usable wash height (450mm) - Will accept Gastronom trays
- Recirculating wash system - Savings, from only 4.5 litres of hot water being used per cycle
- Straight through, corner or front only installation - Flexible in installation
- Stainless steel cabinet construction - Durability & protection against harsh detergents & hot water
- Removable stainless steel scrap trays - Easy daily cleaning & prevents blockages in pump & washarms
- Easy service access - Minimum disruption for maintenance
- Wash cycles are initiated by lowering hood - Operator friendly & simple to use
- Hood safety cut-out switch - Operator safety
- 2 x plate, 1 x cup & 1 x cutlery racks supplied - No initial accessories to purchase
- Water board type tested approved: TT Certificate No: PST 20029 - Approved for direct connection to the water supply
- Electromechanical controls - Easy to repair at the lowest cost & with minimum disruption
