- Compact size, ideally suited to modern bars
- High 250mm wash chamber, will accept beer jugs, wine carafes & champagne flutes
- Sparkling clean glasses in 30 seconds
- Automatic detergent injection, giving consistent result on every load
- Combined bottom stainless steel wash & rinse, ensuring clean glassware
- Easy to operate, select cycle & press button
- Selectable cold cooling down rinse to assist with cooling down of glasses
- Durable double skinned door to reduce heat loss & noise
- Safety cut out on door activates if door is opened during cycle, ensures operator safety
- 3.4 Kilowatt element power, for quicker recovery between loads
- Comes standard with 1 x 430 x 360 mm coated wire basket/rack
- Can be supplied with plastic baskets & divider pegs (sold separately) for wine & tall glasses
- Simple & cost effective to install, comes with hot & cold connection hose & 15 amp electrical lead
- Gravity drain, just connect to an S or P trap
- Service friendly machine, easy repair access from the front of the machine
- Spare parts readily available, to get you up & running with minimum disruption
- High grade all stainless steel welded construction for durability & longevity
- Proudly Australian made & owned your money re circulates in our economy
- All Norris machines are supported by a nationwide network of service agents
- SAI Watermark approved, connect directly to the water supply
- All Norris models comply with the Food Hygiene Regulations, worry free compliance
- Every machine is factory tested before packaging
- 2 Years or 30,000 cycle parts & labour warranty, machine must be registered on our waranty registration page
- Extra 1 year or 20,000 cycle warranty available may be purchased by calling us
- Fast, efficient & reliable customer service, is just a call away
Important information regarding the Clubmate:
- This machine operates by utilising the mains water pressure
- It is only suitable for installation in areas where there is adequate water pressure
- Minimum recommended incoming mains pressure is 200kPa or 30 Psi
- (To determine your water pressure you can check with your local water authority or have a plumber take a gauge reading from you taps.)
